automatic
membrane
pressure booster sets
Automatic membrane pressure booster sets
(volume 24l - 200l)
Deep-well pumps are used in water supply systems of detached houses, farms, small businesses or industrial plants, where the water table in drilled or dug wells remains at a level of up to 8 meters below ground, preventing operation of self-priming pumps. A wide range of specs, including output as well as pumps discharge heads makes it possible to choose the most cost-effective and efficient pump type.
3" multistage deep-well pumps are used for clean water or other non-corrosive liquids at temp. up to 40ºC. The content of sand in the pumped liquid should not exceed 60g/m³. The casings of pumps and motors are made of stainless steel, the connectors for pumps and motors and outlet connections of pumps are bronze, impeller enclosures are polyacetal and impellers are made of noryl. The pumps are equipped with check valves. Pump diameter (inc. shielding of the power cable) does not exceed 74mm.
Pump type | Motor Power |
Efficiency | Pump height [mm] |
Mass [kg] |
||||||||
m³/h | 0,3 | 0,6 | 0,9 | 1,2 | 1,8 | 2,4 | 2,7 | |||||
kW | hp | L/m | 5 | 10 | 15 | 20 | 30 | 40 | 45 | |||
TS 23 | 0,55 | 0,75 | H [m] | 75 | 66 | 61 | 55 | 43 | 24 | 13 | 780 | 4,4 |
TS 30 | 0,75 | 1 | 95 | 86 | 80 | 73 | 57 | 33 | 17 | 1000 | 5,6 | |
TS 45 | 1,1 | 1,5 | 130 | 119 | 112 | 103 | 75 | 47 | 28 | 1380 | 7,6 |
4" multistage deep-well ACUASUB and ACUATEC type pumps are used for pumping of clean water or non-corrosive liquids at temp. of up to 40ºC. The content of sand in the pumped liquid can not exceed 60g/m³.The casings of pumps and motors are made of stainless steel, the connectors for pumps and motors and outlet connections of pumps are bronze, impeller enclosures are polyacetal and impellers are made of noryl.
Pump type | Motor Power |
Current | Capacitor | Q | Efficiency | |||||||||||||
m³/h | 0 | 1,2 | 1,8 | 2,4 | 3 | 3,6 | 4,2 | 4,8 | 5,4 | 6 | ||||||||
kW | HP | 230V | 400V | μF | L/min | 0 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | |||
100/70 | 0,75 | 1 | 6 | 2,2 | 25 | H [m] | 68 | 66 | 62 | 57 | 48 | 43 | 33 | 22 | 9 | 0 | ||
100/100 | 1,1 | 1,5 | 8 | 3 | 40 | 95 | 86 | 82 | 75 | 71 | 57 | 44 | 29 | 11 | 0 |
Pump type |
Motor Power |
Current | Capacitor | Q | Efficiency | |||||||||||||
m³/h | 0 | 1,2 | 1,8 | 2,4 | 3,6 | 4,2 | 4,8 | 5,4 | 5,7 | |||||||||
kW | HP | 230V | 400V | μF | L/min | 0 | 20 | 30 | 40 | 60 | 70 | 80 | 90 | 95 | ||||
Acuatec 60 | 0,75 | 1 | 6 | 2,7 | 25 | H [m] | 57 | 54 | 50 | 44 | 35 | 27 | 18 | 8 | 0 | |||
Acuatec 80 | 1,2 | 1,6 | 8,5 | 3,2 | 40 | 82 | 78 | 72 | 66 | 55 | 42 | 29 | 13 | 0 |
ACUATEC pumps are equipped with electric cable 20m.
4" multistage deep-well Hp and F type pumps are used for pumping of clean water or non-corrosive liquids at temp. of up to 40oC. The content of sand in the pumped liquid can not exceed 300g/m3. The casings of pumps and motors are made of stainless steel, the connectors for pumps and motors and outlet connections of pumps are bronze, impeller enclosures are polyacetal and impellers are made of noryl. The pumps are equipped with check valves. Pump diameter (inc. shielding of the power cable) does not exceed 98,9 mm.
Pump type | Motor Power |
Current | Capacitor | Efficiency up to 6m³/h | |||||||||||||
m³/h | 0 | 1,2 | 1,5 | 1,8 | 2,1 | 2,4 | 3,1 | 3,6 | 4,2 | 4,8 | 5,4 | ||||||
kW | HP | [A] 400V |
[A] 230V |
[μF] 400V |
l/min | 0 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | 70 | 80 | 90 | |
l/s | 0 | 0,33 | 0,42 | 0,50 | 0,58 | 0,67 | 0,83 | 1,00 | 1,17 | 1,33 | 1,50 | ||||||
Total head | |||||||||||||||||
H4B/09 | 0,75 | 1 | 3 | 6 | 40 | H [m] | 65 | 62 | 60 | 59 | 57 | 54 | 48 | 41 | 34 | 25 | 15 |
Recommended operating range |
Pump type | Motor Power |
Current | Capacitor | Efficiency up to 12m³/h | |||||||||||||
m³/h | 0 | 4,2 | 4,8 | 5,4 | 6,0 | 7,2 | 7,8 | 8,4 | 9,6 | 10,8 | 12,0 | ||||||
kW | HP | [A] 400V |
[A] 230V |
[μF] 400V |
l/min | 0 | 70 | 80 | 90 | 100 | 120 | 130 | 140 | 160 | 180 | 200 | |
l/s | 0 | 1,17 | 1,33 | 1,50 | 1,67 | 2,00 | 2,17 | 2,33 | 2,67 | 3,00 | 3,33 | ||||||
Total head | |||||||||||||||||
H4D/19 | 3,0 | 4 | 7,8 | - | - | H [m] | 139 | 106 | 103 | 99 | 95 | 85 | 80 | 74 | 60 | 46 | 32 |
H4D/21 | 3,0 | 4 | 7,8 | - | - | 153 | 118 | 114 | 110 | 105 | 95 | 89 | 82 | 68 | 52 | 37 | |
Recommended operating range |
Pump type | Motor Power |
Current | Capacitor | Efficiency up to 21m³/h | |||||||||||||
m³/h | 0 | 6,0 | 7,2 | 7,8 | 8,4 | 9,6 | 10,8 | 12,0 | 15,0 | 18,0 | 21,0 | ||||||
kW | HP | [A] 400V |
[A] 230V |
[μF] 400V |
l/min | 0 | 100 | 120 | 130 | 140 | 160 | 180 | 200 | 250 | 300 | 350 | |
l/s | 0 | 1,67 | 2,00 | 2,17 | 2,33 | 2,67 | 3,00 | 3,33 | 4,17 | 5,00 | 5,83 | ||||||
Total head | |||||||||||||||||
H4K/14 | 3 | 4 | 7,8 | - | - | H [m] | 72 | 67 | 66 | 64 | 62 | 59 | 55 | 49 | 40 | 30 | 19 |
Recommended operating range |
Pump type | Motor Power |
Current | Capacitor | Efficiency up to 6m³/h | |||||||||||||
m³/h | 0 | 1,2 | 1,5 | 1,8 | 2,1 | 2,4 | 3,1 | 3,6 | 4,2 | 4,8 | 5,4 | ||||||
kW | HP | [A] 400V |
[A] 230V |
[μF] 400V |
l/min | 0 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | 70 | 80 | 90 | |
l/s | 0 | 0,33 | 0,42 | 0,50 | 0,58 | 0,67 | 0,83 | 1,00 | 1,17 | 1,33 | 1,50 | ||||||
Total head | |||||||||||||||||
FF95/10 | 0,75 | 1 | 2,3 | 5,6 | 30 | H [m] | 72 | 69 | 68 | 65 | 62 | 58 | 50 | 38 | 27 | 9 | - |
FF95/15 | 1,1 | 1,5 | 3,1 | 7,6 | 40 | 105 | 102 | 99 | 95 | 92 | 87 | 76 | 62 | 43 | 16 | - | |
FF95/20 | 1,5 | 2 | 4,1 | 10,2 | 50 | 135 | 132 | 130 | 127 | 121 | 113 | 99 | 78 | 56 | 21 | - | |
Recommended operating range |
Pump type | Motor Power |
Current | Capacitor | Efficiency up to 12m³/h | |||||||||||||
m³/h | 0 | 4,2 | 4,8 | 5,4 | 6,0 | 7,2 | 7,8 | 8,4 | 9,6 | 10,8 | 12,0 | ||||||
kW | HP | [A] 400V |
[A] 230V |
[μF] 400V |
l/min | 0 | 70 | 80 | 90 | 100 | 120 | 130 | 140 | 160 | 180 | 200 | |
l/s | 0 | 1,17 | 1,33 | 1,50 | 1,67 | 2,00 | 2,17 | 2,33 | 2,67 | 3,00 | 3,33 | ||||||
Total head | |||||||||||||||||
F14/08 | 1,5 | 2 | 4,1 | 10,2 | 50 | H [m] | 60 | 52 | 51 | 50 | 47 | 45 | 43 | 40 | 35 | 29 | 23 |
F14/12 | 2,2 | 3 | 5,8 | 15,0 | 70 | 88 | 76 | 74 | 72 | 70 | 67 | 64 | 59 | 52 | 43 | 35 | |
F14/17 | 3 | 4 | 7,4 | - | - | 125 | 108 | 105 | 102 | 98 | 94 | 89 | 83 | 73 | 57 | 39 | |
F14/20 | 3 | 4 | 7,4 | - | - | 145 | 125 | 122 | 118 | 113 | 109 | 103 | 95 | 85 | 65 | 50 | |
Recommended operating range |
Pump type | Motor Power |
Current | Capacitor | Efficiency up to 21m³/h | |||||||||||||
m³/h | 0 | 6,0 | 7,2 | 7,8 | 8,4 | 9,6 | 10,8 | 12,0 | 15,0 | 18,0 | 21,0 | ||||||
kW | HP | [A] 400V |
[A] 230V |
[μF] 400V |
l/min | 0 | 100 | 120 | 130 | 140 | 160 | 180 | 200 | 250 | 300 | 350 | |
l/s | 0 | 1,67 | 2,00 | 2,17 | 2,33 | 2,67 | 3,00 | 3,33 | 4,17 | 5,00 | 5,83 | ||||||
Total head | |||||||||||||||||
F24/14 | 3 | 4 | 7,4 | - | - | H [m] | 80 | 71 | 69 | 66 | 63 | 60 | 57 | 51 | 42 | 32 | 21 |
F24/19 | 4 | 5,5 | 10,2 | - | - | 110 | 96 | 93 | 90 | 86 | 82 | 77 | 69 | 58 | 46 | 30 | |
Recommended operating range |
LP. | Name | Net | Gross |
1 | 3” TS 23 deep-well pump with motor 230V or 400V, 0.55kW; max. height of rising – 75m | 1 587PLN | 1 952,01PLN |
2 | 3” TS 30 deep-well pump with motor 230V or 400V, 0.75kW; max. height of rising – 95m | 1 802PLN | 2 216,46PLN |
3 | 3” TS 45 deep-well pump with motor 230V or 400V, 1.1kW; max. height of rising – 135m | 2 018PLN | 2 482,14PLN |
LP. | Name | Net | Gross |
1 | 4” ACUASUB deep-well pump 100/70 with motor 230V or 400V, 0.75kW; max. height of rising – 70m | 1 156PLN | 1 421,88PLN |
2 | 4” ACUASUB deep-well pump 100/100 with motor 230V or 400V, 1.1kW; max. height of rising – 100m | 1 339PLN | 1 646,97PLN |
/wyposażone w 20m przewód elektryczny/
LP. | Name | Net | Gross |
1 | 5” ACUATEC deep-well pump 60 with motor 230V or 400V; 0,9kW; max. height of rising – 60m | 1 306PLN | 1 606,38PLN |
2 | 5” ACUATEC deep-well pump 80 with motor 230V or 400V, 1.2kW; max. height of rising – 80m | 1 564PLN | 1 923,72PLN |
LP. | Name | Net | Gross |
1 | 4” FF95/10 deep-well pump with motor 230V or 400V, 0.75kW; max. height rising – 72m | 1 334PLN | 1 640,82PLN |
2 | 4” FF95/15 deep-well pump with motor 230V or 400V, 1.1kW; max. height rising – 105m | 1 525PLN | 1 875,75PLN |
3 | 4” FF95/20 deep-well pump with motor 230V or 400V, 1.5kW; max. height rising – 135m | 1 734PLN | 2 132,82PLN |
LP. | Name | Net | Gross |
1 | 4” F14/8 deep-well pump with motor 230V or 400V, 1.5kW; max. height of rising – 60m | 1 522PLN | 1 872,06PLN |
2 | 4” F14/12 deep-well pump with motor 230V or 400V, 2.2kW; max. height of rising – 85m | 1 993PLN | 2 451,39PLN |
3 | 4” F14/17 deep-well pump with motor 400V, 3kW; max. height of rising – 120m | 2 501PLN | 3 076,23PLN |
4 | 4” F14/20 deep-well pump with motor 400V, 3kW; max. height of rising – 140m | 2 707PLN | 3 329,61PLN |
LP. | Name | Net | Gross |
1 | 4” F24/14 deep-well pump with motor 400V, 3kW; max. height of rising – 80m; | 2 691PLN | 3 309,93PLN |
2 | 4” F24/19 deep-well pump with motor 400V, 4kW; max. height of rising – 94m | 3 393PLN | 4 173,39PLN |
LP. | Name | Net | Gross |
1 | 4” H4D/19 deep-well pump with motor 400V, 3kW; max. height of rising – 139m | 1 825PLN | 2 244,75PLN |
2 | 4” H4D/21deep-well pump with motor 400V, 3kW; max. height of rising – 153m | 1 976PLN | 2 430,48PLN |